FLS1000 LABORATORY FLEXIMETER
Tabletop instrument, in powder-coated steel, with precision electronics for the determination of the breaking load (max load) on ceramic or similar specimens. Semi-automatic, it is equipped with a stainless steel surface on which two oscillating supports (knives) are positioned, mechanically moved and manually and individually adjustable, which in turn receive the specimen to be tested. With this tool it is possible to determine the flexural strength, the modulus of rupture, and deflection of curvature of the sample operating according to the standards: UNI EN ISO 10545-4 | ASTM C 648 – 84 | DIN 51030 | EN 100 | EN12825 Load cell of 1000 kg. Different sizes available.
Electric furnaces used in the thermal processes of the metallurgical, chemical, dental and ceramic laboratory.
The combination of lightened plates, resistances mounted on glow plugs and the use of preformed ceramic fibers, allow these ovens to rise in temperature quickly and cool down just as quickly, so as to offer the greatest advantages in intermittent work.
Equipped with a K1P programmer with which it is possible to set 4 cooking cycles each consisting of 8 steps.
Models LKN74, LKN75, LKN76, LKN84, LKN85 and LKN86 equipped with wire resistors.
LKN77 and LKN87 models equipped with “silicon carbide” elements.
Models LKN78, LKN79, LKN80, LKN88, LKN89 and LKN90 with resistors consisting of elements in “silicide molybdenum”
Various models available (firing area dimensions and maximum temperature).
Oven equipped with different firing zones with different temperatures (thermal gradient), which follow the same firing cycle.
Features:
- Temperature uniformity within each of the 6 cells of approximately +/- 2 / 2.5 ° C;
- Possibility of setting and managing minimum gradients of 10 ° C and maximum of 60 ° C between cell and cell
- Possibility of carrying out rapid cycles with times of reaching the maximum temperature of +/- 20 minutes and a maximum of 5 hours.
- Possibility to program the cooling (optional)
- Management of the cooking cycle entrusted to a computer equipped with a touch screen
- Possibility of filing the results obtained in the various cells during the thermal cycles; test date and material tested
- Possibility of firing samples with a maximum size of 40 x 80 mm.
Mechanical shaft stirrer with LED display.
Maximum stirring rate of 20 Litres.
Agitation rate adjustable from 50 to 2,200 rpm with a power of 50W.
Overheating motor overload indicator light.
Upper passage hole for stirring rods.
Supplied complete with steel spindle and relative key.
Degree of protection IP 42. 220V power supply.
Water veil cabin in stainless steel with water recirculation dust suppression system.
Useful working width: 97 × 70 cm in depth.
0.5 Hp water recirculation pump.
Complete with settling tank for recirculation and waste water disposal.
Power supply 400 V three-phase, 50 Hz.